Toll Free: 800 714 2877

EAW SPEAKERS


Spec Sheet

EAW KF SERIES KF650z

The KF650z Virtual Array loudspeaker offers 60-degree horizontal dispersion, with a 3-way design fostering very high vocal reproduction quality. A cone-driven midrange horn and horn-loaded woofer extend pattern control into the lower octaves. The trapezoidal enclosure is vented; and power mode is switchable between biamp and triamp.
Operating Mode Bi-amp or tri-amp
Operating Range 100 Hz to 20 kHz
Beamwidth 60 (h) x 45 (v)
Power Handling/Output BI-AMPED:(LF/MF) 700W (8 ohms) - 128.5dB SPL (long
term);(HF) 160W (8 ohms)-132dB SPL (long term)
TRI-AMPED:(LF) 700W (8 ohms) - 128.5dB SPL (long term)
(MF) 400W (8 ohms) - 135dB SPL; (HF) 160W (8 ohms) - 132dB SPL
Connections 2 Neurik NL4, 2 NL8 Speakons
Rigging/Mounting 3-position flytrack; threaded mounting points
Dimensions/Weight 33.25" (h) x 19.75" (w) x 20.6" (d); 135 lbs

Spec Sheet

EAW JF SERIES JF290z

EAW's JF290z 2-way loudspeaker system provides high output, low distortion sound reinforcement for the entire range of pro audio applications. The 12 in low frequency cone and 1.4 in exit/3 in voice coil high frequency compression driver provides higher output and lower distortion plus enhanced power handling capabilities for better performance in both portable and permanently installed applications. The constant directivity HF horn provides optimized dispersion of HF information without problematic beaming. EAW's advanced beamwidth matching crossover selects a crossover point where the HF horn's beamwidth matches that of the woofer. The result is more even off-axis frequency response for more complete coverage. The JF290z offers a switchable powering mode: passive operation using the internal crossover filter network or bi-amplified operation requiring the use of pre-configured MX Series processor settings.

Spec Sheet

EAW JF SERIES JF590z

EAW's JF590z 2-way loudspeaker system provides high output, low distortion sound reinforcement for the entire range of pro audio applications. The 15 in low frequency cone and 1.4 in exit/3 in voice coil high frequency compression driver provides higher output and lower distortion plus enhanced power handling capabilities for better performance in both portable and permanently installed applications. The constant directivity HF horn provides optimized dispersion of HF information without problematic beaming. EAW's advanced beamwidth matching crossover selects a crossover point where the HF horn's beamwidth matches that of the woofer. The result is more even off-axis frequency response for more complete coverage. The JF590z offers a switchable powering mode: passive operation using the internal crossover filter network or bi-amplified operation requiring the use of pre-configured MX Series processor settings.

Spec Sheet

EAW JF SERIES JF50

The JF50's extremely small size, smooth frequency response, broad, even coverage pattern and surprisingly high output capabilities make it a natural candidate for applications where aesthetic requirements or space allowances make it almost impossible to locate a loudspeaker, but high quality sound is nonetheless a high priority. The two-way full range loudspeaker system shall incorporate two 5.25- inch cone low frequency transducers and one 25mm soft-dome high frequency transducer. The total system shall meet the following performance criteria: Frequency Response of 100 - 18k Hz 3 dB; Axial Sensitivity (1 W @ 1 m) of 94 dB SPL (LF); 100 hour sine wave Power Handling of 120 Watts , AES method Power Handling of 300 Watts; Horizontal coverage of 120 degrees between 6dB down points; Vertical coverage of 80 degrees between 6dB down points.
Frequency Response 3db 100 Hz to 18 kHz
Axial Sensitivity SPL 1w @ 1m 94dB
Power Handling AES 300 Watts
100 Hour Sine Wave 120 Watts
Maximum Output Long Term 112dB SPL
Peak 119dB SPL
LF Subsystem 2 x 5.25" Vented
HF Subsystem 1 x 1" soft dome
Powering Mode Passive
Height 16.5 in (419 mm)
Width 6.25 in (159 mm)
Depth 6.0 in (152 mm)
Back Width 4.22 in (107 mm)
Net Weight 15.5 lbs. (7.0 kg)

Spec Sheet

EAW UB SERIES UB42

The UB42 offers extreme wide-angled (170-degree horizontal) coverage from a unique ultra-low-profile dual baffle enclosure that virtually disappears from view. High output, and with exceptional definition. The enclosure is outfitted with comprehensive mounting/suspension points.
Product Group I
Operating Mode Passive
Operating Range 70 Hz to 18 kHz
Beamwidth 170 (h) x 50 (v)
Power Handling/Output 350W (8 ohm) - 119.4dB SPL (long term)
Connections Barrier strip
Rigging/Mounting Integral mounting points
Dimensions/Weight 6.25" (h) x 35.25" (w) x 14.4" (d); 32 lbs

EAW SM SERIES SM84N

The SM84N is a unique high output stage monitor. In addition to a 4 x 8-inch LF driver configuration and split baffle design, the SM84N employs a 1.4 in exit neodymium compression driver on a unique 40-degree x 90-degree angled front horn. Monitor angle extends up to 53 degrees. It is capable of 139 dB SPL peak output.
Operating Mode Bi-amp
Operating Range 60 Hz to 17 kHz, +/-3 dB
Beamwidth 40 (h) x 90 (v)
Power Handling/Output Bi-Amped: 1000 w (LF) (4 ohms)-129dB SPL (long term); (HF) 200 W (8 ohms)-133dB SPL (long term).
Connections 4 Neutrik NL4 Speakon (2 ea side)
Dimensions/Weight 12.5" (h) x 29.8" (w) x 15.9" (d); 79.5 lbs
Back to Top